FEPG Conductive and Anti-Static Sheets (12" x 12")
GENERAL PROPERTIES OF FEP H2 SHEET
Description
FEP H2 is a thermally conductive, antistatic sheet that is manufactured by Fluorotherm® and is opaque gray in color. These thermoplastic sheets can be heat sealed, thermoformed, laminated, welded, or metalized to be used in a wide variety of applications. With its almost universal chemical resistance, anti-static properties, wide operating temperature range, mechanical toughness, and long-term weatherability there are numerous uses where FEP H2 becomes an ideal solution. FEP H2 is a super smooth, nonstick, slippery surface with extremely low friction. Fluorotherm® FEP H2 is available in thicknesses ranging from .010” to .094”.
Chemical Compatibility
-
FEP H2 sheet exhibits chemically inertness to a wide range of solvents, inorganic chemicals and organic solvents
-
Anti-Static Properties - Superior reliability and retention of properties
Anti-Static Resistivity and Thermal Conductivity
-
Surface Resistivity – 10e10 to 10e12 Ohms per sq.
-
Thermal Conductivity – 0.305 to 0.482 Watts/M-K
Base FEP resin has a Thermal Conductivity of 0.190 to 0.250 Watts/M-K
Wide thermal Range
-
High continuous service temperature
-
Continuous service temperatures -240⁰C to 205⁰C (-400⁰F to 400⁰F)
-
Heat Sealable
-
Can be thermally welded
Mechanical Toughness
-
Excellent Anti-stick and low frictional properties
-
Impact and tear resistance
-
High dimensional stability
Long term weatherability
Hydrophobic, non-wetting to most chemicals
Typical Applications
· Appliance controls
· Applications requiring simultaneous thermal and static charge dissipation
· Corrosive environments where temperature control is required
· Printing and graphics
· Laboratory and Analytical Environment Surfaces
· Gasketing and sealing applications where thermal buildup and seal integrity is a problem
*Surface Resistivity and Thermal Conductivity may be adjusted by varying the formulation of the FEP based resin blend
Attributes
-
Size: 12" x 12"
-
Selected grades of FEP comply with FDA 21 CFR.177.1550
-
Tolerance Thickness: -0.000/+20%.
Technical Properties
For FEP technical properties, see Fluorotherm.